Swivel flange + dry-air purge port
+ USD 135
Target ±15°; 1/4 in NPT. Solids service only after vessel pressure, purge gas and dust review.
Include in RFQ80GHz · POWDER / GRANULES
Aim at the material surface, keep clear of the filling stream and plan for buildup. Request silo radar with a compatible swivel flange and clean, dry purge connection where the process needs them.
Configure RLS-SLDCONFIGURATION REQUEST · RLS-SLD
Cement · fly ash · lime · mineral powders · bulk granules
| Selection parameter | Enquiry scope |
|---|---|
| Range target | Up to 120 m; reflectivity, dust and model dependent |
| Aiming request | 304/316 stainless swivel flange, target ±15° |
| Purge request | 1/4 in NPT dry-air connection; supply to be specified |
| Surface review | Angle of repose, cone geometry and changing fill profile |
| Dust review | Product reflectivity and lens buildup, not only airborne dust |
| Integration | Supply, output, vessel temperature/pressure, lens material, dust zone and mounting rating |
Values labelled targets are sourcing requests, not released ratings. Range, precision, probe, pressure, temperature and approvals must be confirmed together for the exact ordered variant.
INSTALLATION REVIEW
Provide silo drawing, minimum and maximum level, filling position and discharge geometry.
A single level reading is not a direct mass measurement; bulk density and surface shape affect inventory.
Purge pressure/flow and cleanliness must be compatible with the sensor, lens seal and process.
Review dust hazardous-area requirements for the exact ordered assembly.
OPTIONAL ASSEMBLIES
+ USD 135
Target ±15°; 1/4 in NPT. Solids service only after vessel pressure, purge gas and dust review.
Include in RFQ+ USD 45
Confirm module/app and hazardous-area permissions. Do not open an Ex enclosure or use radio contrary to issued instructions.
Include in RFQIndicative USD allowances. Base sensor, freight and taxes excluded; final configuration and pricing require quotation.
ENGINEERING QUESTIONS
No. It is useful when the mounting geometry needs adjustment. Confirm the target reflection area and installation drawing before choosing an aiming assembly.
No. This is a sourcing range target. Actual measuring distance depends on the selected radar, dielectric reflectivity, filling conditions, buildup and vessel geometry.
MAKE THE PROCESS THE STARTING POINT
Media, range, temperature, pressure, nozzle and output requirements help define an offer you can evaluate.